25 Comments for HHO= opec suck my exhaust

• 1. michaelambrosia  |  September 8th, 2010 at 3:25 am

  thanks for sharing

• 2. rick155555  |  September 8th, 2010 at 3:56 am

  Try the above with a bubbling bowl of gasoline if you think HHO is not safe. Of course it is safe. There are commercial applications in use all over the world like spot welding glass blowing etc. It is produced on demand, not stored in a gas tank Mr. Opec minion. lol
  HHO explosively combines to make water when ignited, H2O hence it takes less volume, hence it is an implosion and should be on the upstroke, where gas is on the downstroke.

• 3. Vistal1  |  September 8th, 2010 at 4:33 am

  its not to safe or Efficient. Its only good enough for a 50% max increase in millage. Its not about running a car on it .Its about reducing emissions and Increasing millage by a bit. HHO is not a Implosion. DUDE you need alot more research before you start posting BS.,

• 4. rick155555  |  September 8th, 2010 at 5:18 am

  Great stuff. Clearly you are smarter than all the scientists in the hallowed halls, who would look at this with awe and amazement, dumbfounded, like they had seen a miracle. Such high tech is totally over the heads of government and big business, but you did it buddy. Bravo!
  Next to free fuel from water. Now why can’t mainstream science accomplish what you did so easily? Makes you wonder doesn’t it, whose side they are on.

• 5. rick155555  |  September 8th, 2010 at 5:33 am

  If gas is an explosion, and HHO is an implosion, would they not be working against themselves?

• 6. AcaiBerryMONAVIE  |  September 8th, 2010 at 5:42 am

  suck SATAN’S COCK OPEC

• 7. thejackyl40  |  September 8th, 2010 at 6:16 am

  Buy your stainless steel by the pound from a place that buys scrap Iron and metal they usually have bins of stainless steel 304 and 316 sheets from 20 gauge to 16 gauge, plus stainless tubes tubes,Restaurant ware,other bins of aluminum,copper and stuff like that. I buy all I can haul off I usually spend about $100.00 to $150.00 I catch it at 0.58 cents a pound at present prices, then I take and cut it to plates or have it cut for me. But thats were to go to save money big time.

• 8. thejackyl40  |  September 8th, 2010 at 7:15 am

  Buy your stainless steel by the pound from a place that buys scrap Iron and metal they usually have bins of stainless steel 304 and 316 sheets from 20 gauge to 16 gauge,plus stainless tubes tubes,Restaurant ware,other bins of aluminum,copper and stuff like that. I buy all I can haul off I usually spend about $100.00 to $150.00 I catch it at 0.58 cents a pound at present prices, then I take and cut it to plates or have it cut for me. But thats were to go to save money big time.

• 9. thejackyl40  |  September 8th, 2010 at 7:54 am

  took me 5 months to get all the stuff I needed to complete mine,know I have to remove it all and do some cleaning and tweaking. hope I have saved somebody some money telling were to get Stainless 304 or 316 cheaper.

• 10. thejackyl40  |  September 8th, 2010 at 8:28 am

  I’m not sure how much out put of HHo I’m getting I do know it’s way more then enough, factory millage for my s-10 is 16 town 21 or 22 highway,normally I would get close to 105 miles on 5 gallons of gas with my generators I have gone 300 with gas left over

• 11. thejackyl40  |  September 8th, 2010 at 8:53 am

  I’m running a custom 120 PWM with dual alternators the Alternator running the system is a 200 amp alternator charging 2 batteries in the bed of my S-10 were my gens are also located my plates are 18 gauge 316 Stainless Steel

• 12. thejackyl40  |  September 8th, 2010 at 9:04 am

  each generator stands 19″and T’ed at the bottom for my water supply and cooling system with a 12v water pump into a radiator with a cooling fan under the bed of my pick up ,

• 13. thejackyl40  |  September 8th, 2010 at 9:30 am

  Okay I really liked your set up, specially the plate design,so I put one together had good results and played with it for awhile.Showed a lot of people your video then I had to design my plates a bit different,I’m running 2 generators,each cell has 20 plates with 032 nylon washers,

• 14. Jakextremecmp  |  September 8th, 2010 at 9:48 am

  That’s some awesome production, little better than my cell made from some old titanium hard drive disks stacked in a parallel series of six running of a old automotive battery charger.

• 15. mike081283  |  September 8th, 2010 at 10:30 am

  how much did the ss cost u

• 16. bradpage3000  |  September 8th, 2010 at 10:58 am

  try aluminum plates
  youll get gas with no electricity

• 17. Vistal1  |  September 8th, 2010 at 11:46 am

  Very good. But use KOH or NOAH instead of Baking soda ,it will produce a toxic gas and will eventualy rune your plates and engine .Message me if ya wanna read on what baking soda in tour cell would do.But good going hope it you can produce 1lpm of gas to help the car.mine does and i got a 44% increase in gas millage.

• 18. xerochaos187  |  September 8th, 2010 at 12:08 pm

  hell yes bro.

• 19. turbochardged  |  September 8th, 2010 at 1:07 pm

  nice i’m working on the same stuff

• 20. cribcat1  |  September 8th, 2010 at 1:12 pm

  Right on, you’re grass roots.That’s my style.

• 21. 30GB  |  September 8th, 2010 at 1:27 pm

  you shold try 24v and see if that will work and it might even run a car with three of thos cells

• 22. HHODork  |  September 8th, 2010 at 2:13 pm

  i use Oxyclean over standard soda and have had great results with the same type of setup.

  Good work. I will keep my eye on your work.

• 23. daisygirl06  |  September 8th, 2010 at 3:13 pm

  AWSOOME My DADDy ON yOUTUBE!!!!
  COOL!!

• 24. batteryphil  |  September 8th, 2010 at 3:30 pm

  the wider the straps the better. electricity travels along the surface, so the wider the better. that will allow the straps to handle more current before heating up!!!

• 25. Hydroginist  |  September 8th, 2010 at 3:57 pm

  great Cell only thing I think would be a good addition is replace the copper wires with SS straps. The Insulation will brake down and the copper will oxidize if you run youor cell for any lenght of time. Would like to know how many Amps your cranking out. With cables that size you could be putting 60 70 Amps right off of a Batt like you have it.

  Good Luck

Leave a Comment for HHO= opec suck my exhaust

Trackback this post  |  Subscribe to the comments via RSS Feed